Skip to content
Burnaby Masonry Co.Masonry Contractor
Chimney Repair & Rebuilding in Burnaby, BC

Chimney Repair & Rebuilding in Burnaby, BC

Leaning, leaking, or crumbling chimneys repaired, rebuilt above the roofline, or fully reconstructed. Serving Burnaby and Metro Vancouver — free quotes.

Burnaby Masonry Co. provides expert chimney repair & rebuilding in Burnaby, BC. Leaning, leaking, or crumbling chimneys repaired, rebuilt above the roofline, or fully reconstructed. Call us for a free quote — we're based in Burnaby and serve Burnaby regularly.

Chimney Repair & Rebuilding in Burnaby: what to know

Burnaby has thousands of post-war brick chimneys, and most of them are now 60-70 years old. Crown failures, freeze-thaw spalling, and failed mortar joints are what we fix most often here.

Chimney repair and rebuilding covers everything from a leaking crown to a chimney that's leaning and needs to come down to the roofline and be rebuilt. Chimneys take the worst of the weather, so they fail before the rest of the house. We diagnose the real problem, whether it's a cracked crown, failed flashing, spalling brick, or a deeper structural issue, and fix it properly. In the Lower Mainland's wet climate, a sound chimney is mostly about keeping water out, and that's exactly what we build for.

What's included in our chimney repair & rebuilding service

  • Full chimney inspection from the firebox to the crown
  • Crown repair or rebuild to stop water sitting on top
  • Repointing failed mortar joints in the stack
  • Brick replacement for spalled or cracked masonry
  • Rebuilds above the roofline where the damage stops
  • Full chimney reconstruction when the structure is gone
  • New chimney caps and flashing detail to seal the penetration
  • Water-repellent sealing on the finished masonry

When Burnaby homeowners call us for chimney repair & rebuilding

The chimney is leaning or bowing

This is a safety issue. Leaning masonry means the structure or footing is failing and it can fall. Stop using it and call us.

Water stains on the ceiling near the chimney

A leaking chimney shows up as stains inside before you ever see it outside. The crown, cap, or flashing is usually the culprit.

Crumbling brick or mortar on the stack

Pieces of brick or mortar in the gutter or on the roof mean freeze-thaw is breaking the chimney apart.

A cracked or missing crown

The crown is the concrete cap on top. When it cracks, water pours straight into the chimney and accelerates everything.

Burnaby properties: what we see

Burnaby is our home base, which means we know its housing stock better than any other city in Metro Vancouver. The city has a genuinely wide range: Capitol Hill, Edmonds, and the older central neighbourhoods have pre-war and post-war homes with original brick chimneys and lime-mortar masonry that needs careful matching. Brentwood and Metrotown are in the middle of rapid densification — the existing single-family homes around the new towers are often renovated to compete, and masonry upgrades are part of that. Burnaby Mountain and the SFU area have their own character. The older Edmonds and East Burnaby neighbourhoods have the most concentrated heritage masonry work.

We work throughout Burnaby — including Brentwood, Metrotown, Edmonds, Capitol Hill, Burnaby Mountain — and we know how the terrain, housing stock, and climate vary across the city. Every quote reflects what we actually see on site.

Chimney Repair & Rebuilding in Burnaby, BC

How we do chimney repair & rebuilding in Burnaby

  1. 1

    Inspect top to bottom

    We check the crown, cap, flashing, mortar, and brick, and look for any structural movement, then tell you what's actually wrong.

  2. 2

    Recommend repair or rebuild

    Small problems get repaired. If the damage runs deep, we rebuild from the point where the masonry is still sound.

  3. 3

    Do the masonry

    We repoint, replace brick, or rebuild the stack with matching materials and a properly formed crown that sheds water.

  4. 4

    Seal the penetration

    New flashing and a quality cap keep water out where the chimney meets the roof, which is where most leaks start.

  5. 5

    Waterproof and finish

    We apply a breathable water repellent so the masonry stays dry through our wet winters, then clean up the roof and site.

Why choose Burnaby Masonry for chimney repair & rebuilding in Burnaby

We find the real leak

Most chimney leaks are misdiagnosed. We trace it to the source instead of slapping sealant on and hoping.

Built for Lower Mainland weather

Our crowns, caps, and flashing are detailed for heavy, sideways rain, not a dry climate.

Safe with structural calls

If a chimney is unsafe, we'll tell you plainly and won't push a band-aid fix on something that needs a rebuild.

Clean, careful roof work

We protect your roof and property and leave the site clean. No debris left in the gutters.

More masonry services in Burnaby

Chimney Repair & Rebuilding across Metro Vancouver

Chimney Repair & Rebuilding in Burnaby: FAQs

Do you do chimney repair & rebuilding in Burnaby?

Yes. Burnaby Masonry Co. covers Burnaby and all of Metro Vancouver for chimney repair & rebuilding. Burnaby's mix of post-war bungalows and rapidly growing condo-adjacent neighbourhoods means we regularly work on everything from 70-year-old lime-mortar chimneys to new stone veneer on recent additions.

Are you actually based in Burnaby?

Yes — Burnaby is our home base. Our crew lives and works here, which means faster response times, better knowledge of the local housing stock, and no travel premium built into your quote.

Do you work on heritage homes in Edmonds and Capitol Hill?

Yes — these are the Burnaby neighbourhoods we know best. The pre-war and early post-war homes in Edmonds and Capitol Hill have masonry that needs heritage-sensitive repair: lime mortar matching, salvage brick sourcing, and careful joint profiling.

My chimney is leaning. Is that dangerous?

A leaning chimney means the masonry or footing is failing, and it can come down in a windstorm. Stop using it and call us. We'll tell you whether it can be repaired or needs a rebuild above the roofline.

Why is my chimney leaking when it rains?

Usually it's a failed crown, missing cap, or cracked mortar joints letting water in. We find the source and fix it, then seal the masonry so it stays dry.

Get a free chimney repair & rebuilding quote in Burnaby

Burnaby Masonry Co. offers free, no-obligation quotes on brick, stone, and block projects in Burnaby and across Metro Vancouver.

Call (604) 210-5842