Skip to content
Burnaby Masonry Co.Masonry Contractor
Brick Masonry in Richmond, BC

Brick Masonry in Richmond, BC

Full-service brick masonry — new brickwork, repairs, facades, and features built and maintained by skilled bricklayers. Serving Richmond and Metro Vancouver — free quotes.

Burnaby Masonry Co. provides expert brick masonry in Richmond, BC. Full-service brick masonry — new brickwork, repairs, facades, and features built and maintained by skilled bricklayers. Call us for a free quote — we're based in Burnaby and serve Richmond regularly.

Brick Masonry in Richmond: what to know

Brick masonry in Richmond is all about understanding the soil and drainage conditions. We build and repair with Richmond's high water table and flat terrain built into every detail.

Brick masonry covers everything we do with brick — new brickwork, repairs, facades, columns, chimneys, garden walls, and features. We're bricklayers first, and brick is the material we've built the most of across Burnaby and Metro Vancouver. Whether you need a new brick wall laid from scratch, a failing brick chimney rebuilt, or existing brickwork repaired and repointed, we do it right: proper footing, matched mortar, and joints tooled clean. Full-service brick masonry, one crew, one quote.

What's included in our brick masonry service

  • New brick walls, facades, columns, and piers
  • Brick repair: cracked, spalled, loose, and failing brick replaced
  • Brick repointing with mortar matched to your wall's age and profile
  • Chimney brickwork — repairs, crowns, and above-roofline rebuilds
  • Heritage brick repair with soft lime mortar on older homes
  • Brick garden walls, planters, steps, and entries
  • Brick matching on repairs so the work disappears into the existing wall
  • Full site clean-up and debris haul-away

When Richmond homeowners call us for brick masonry

New brickwork on a home or addition

Planning a new brick wall, facade, or feature? We lay it properly — right footing, bond pattern, and joint profile.

Failing mortar or crumbling brick

Crumbling joints and spalling brick let water in fast. The earlier we catch it, the simpler the fix.

Chimney work

Chimneys are the hardest-worked brick on any house. Crown repairs, repointing, and rebuilds are all in our scope.

Heritage homes with soft brick

Old brick needs lime mortar, not modern Portland. We work on pre-1940 homes across New Westminster, East Vancouver, and Burnaby all the time.

Richmond properties: what we see

Richmond sits near sea level on a river delta, which fundamentally changes the engineering requirements for any masonry structure. The water table is high, the soil compresses under load, and drainage doesn't happen the way it does on sloped lots. Steveston has heritage brick and some of the oldest commercial masonry in the region. The City Centre and Brighouse areas have dense residential and commercial development where stone veneer and block work are common. Terra Nova's newer houses have original stone veneer installations that are now 15–20 years old.

We work throughout Richmond — including Steveston, Brighouse, Terra Nova, City Centre — and we know how the terrain, housing stock, and climate vary across the city. Every quote reflects what we actually see on site.

Brick Masonry in Richmond, BC

How we do brick masonry in Richmond

  1. 1

    Assess the brick and mortar

    We look at what type of brick you have, how the mortar is holding, and what the job actually needs — repair, repoint, or new build.

  2. 2

    Match the mortar

    On older homes we match lime mortar to the original. On newer work we specify the right Portland blend for strength and colour.

  3. 3

    Build or repair

    New brick goes up level and plumb on a proper footing. Repairs cut out only what's failed and replace it with a match.

  4. 4

    Tool and clean

    Joints get tooled to a clean profile that sheds water. The face gets washed down and the site cleared before we leave.

Why choose Burnaby Masonry for brick masonry in Richmond

Bricklayers, not generalists

Brick is what we do most. We've laid and repaired it on hundreds of Burnaby and Metro Vancouver properties.

Right mortar for the age of the wall

Soft brick gets soft mortar. Using hard modern mix on old brick causes spalling — we've seen it, and we don't do it.

New and repair under one roof

We handle both new brickwork and repairs, so one trade handles everything from the footing to the finished joint.

Heritage experience

Pre-1940 character homes across the Lower Mainland are a big part of our work. Lime mortar, matched brick, invisible repairs.

More masonry services in Richmond

Brick Masonry across Metro Vancouver

Brick Masonry in Richmond: FAQs

Do you do brick masonry in Richmond?

Yes. Burnaby Masonry Co. covers Richmond and all of Metro Vancouver for brick masonry. Richmond sits near sea level on soft soil, so foundation prep and proper footings are non-negotiable for any wall we build there.

Can you build a retaining wall on Richmond's soft soil?

Yes — but the footing and drainage requirements are different from sloped lots in other cities. Richmond's high water table means footings need to go deeper, gravel drainage beds need to be wider, and the wall needs to be sized for hydrostatic pressure. We spec every Richmond wall for the actual soil conditions.

My Richmond stone veneer is falling off the wall. Why?

Usually it's a failed adhesive bond — either the scratch coat failed, the drainage mat was missing so moisture got behind the stone, or the original installation didn't follow the right substrate prep. We assess the cause before proposing a fix, because patching over a drainage problem just delays the next failure.

Get a free brick masonry quote in Richmond

Burnaby Masonry Co. offers free, no-obligation quotes on brick, stone, and block projects in Burnaby and across Metro Vancouver.

Call (604) 210-5842