Skip to content
Burnaby Masonry Co.Masonry Contractor
Bricklaying in Richmond, BC

Bricklaying in Richmond, BC

Brick installation and repair done by hand: new walls, facades, piers, and feature brickwork laid level and true. Serving Richmond and Metro Vancouver — free quotes.

Burnaby Masonry Co. provides expert bricklaying in Richmond, BC. Brick installation and repair done by hand: new walls, facades, piers, and feature brickwork laid level and true. Call us for a free quote — we're based in Burnaby and serve Richmond regularly.

Bricklaying in Richmond: what to know

New brickwork in Richmond ranges from feature walls and entry columns in Steveston's heritage-influenced homes to brick accents on the modern builds going up in Brighouse and City Centre.

Bricklaying is the core of what we do: brick installation and repair, by hand, laid level and true. We build new brick walls, facades, garden and boundary walls, piers, columns, planters, and feature brickwork across Burnaby and Metro Vancouver, and we repair brick that's cracked, settled, or failing. Good bricklaying isn't just stacking brick. It's the right footing, consistent joints, proper coursing, and brick that's bonded to last. Whether you need new brick installed or existing brick repaired, we get the fundamentals right.

What's included in our bricklaying service

  • New brick installation: walls, facades, piers, and columns
  • Brick repair: cracked, loose, settled, or spalled brick replaced
  • Garden walls, boundary walls, and planters in brick
  • Brick steps, entries, and feature work
  • Footings sized and poured for the load
  • Consistent coursing, level lines, and clean tooled joints
  • Brick matched on repairs so the work blends in
  • Site clean-up and debris haul-away

When Richmond homeowners call us for bricklaying

A new brick wall or facade

Planning new brickwork on a home, garden, or addition? We lay it level, plumb, and bonded properly so it lasts.

Cracked or damaged brick

Brick that's cracked, loose, or shifting needs proper repair, cutting out and replacing units, not just filling over the problem.

Brick piers, columns, or steps

Entry columns, gate piers, and brick steps need real footings and accurate coursing to stay straight. That's our wheelhouse.

Matching an existing brick wall

Extending or repairing existing brickwork takes a careful match on brick and joint so the new work disappears into the old.

Richmond properties: what we see

Richmond sits near sea level on a river delta, which fundamentally changes the engineering requirements for any masonry structure. The water table is high, the soil compresses under load, and drainage doesn't happen the way it does on sloped lots. Steveston has heritage brick and some of the oldest commercial masonry in the region. The City Centre and Brighouse areas have dense residential and commercial development where stone veneer and block work are common. Terra Nova's newer houses have original stone veneer installations that are now 15–20 years old.

We work throughout Richmond — including Steveston, Brighouse, Terra Nova, City Centre — and we know how the terrain, housing stock, and climate vary across the city. Every quote reflects what we actually see on site.

Bricklaying in Richmond, BC

How we do bricklaying in Richmond

  1. 1

    Plan and footing

    We lay out the work and pour a footing sized for the wall and the soil. The footing is what keeps brick from cracking and settling.

  2. 2

    Set the brick

    Courses go up level and plumb with a string line, consistent joints, and the right bond pattern for the job.

  3. 3

    Repair and match

    On repairs we cut out damaged brick, install a match, and blend the new units and joints into the surrounding wall.

  4. 4

    Tool the joints

    Joints are tooled to a clean, consistent profile that sheds water and looks sharp.

  5. 5

    Clean up

    We clean the face, clear the site, and walk the finished brickwork with you.

Why choose Burnaby Masonry for bricklaying in Richmond

Installation and repair under one roof

New brick or broken brick, we do both, so you don't need a separate trade for each.

Level, plumb, and bonded right

Sloppy bricklaying shows and weakens the wall. We check our lines course by course.

Footings done properly

We don't lay brick on bad ground. The footing gets done right so the wall stays straight.

Repairs that match

We match brick and joint on repairs so the fix blends into the existing wall instead of standing out.

More masonry services in Richmond

Bricklaying across Metro Vancouver

Bricklaying in Richmond: FAQs

Do you do bricklaying in Richmond?

Yes. Burnaby Masonry Co. covers Richmond and all of Metro Vancouver for bricklaying. Richmond sits near sea level on soft soil, so foundation prep and proper footings are non-negotiable for any wall we build there.

Can you build a retaining wall on Richmond's soft soil?

Yes — but the footing and drainage requirements are different from sloped lots in other cities. Richmond's high water table means footings need to go deeper, gravel drainage beds need to be wider, and the wall needs to be sized for hydrostatic pressure. We spec every Richmond wall for the actual soil conditions.

My Richmond stone veneer is falling off the wall. Why?

Usually it's a failed adhesive bond — either the scratch coat failed, the drainage mat was missing so moisture got behind the stone, or the original installation didn't follow the right substrate prep. We assess the cause before proposing a fix, because patching over a drainage problem just delays the next failure.

Do you handle both new bricklaying and brick repair?

Yes. We lay new brick walls, facades, piers, and steps, and we repair cracked, loose, or settled brick on existing walls. New install or repair, it's the same crew.

Get a free bricklaying quote in Richmond

Burnaby Masonry Co. offers free, no-obligation quotes on brick, stone, and block projects in Burnaby and across Metro Vancouver.

Call (604) 210-5842