Skip to content
Burnaby Masonry Co.Masonry Contractor
Chimney Repair & Rebuilding in Surrey, BC

Chimney Repair & Rebuilding in Surrey, BC

Leaning, leaking, or crumbling chimneys repaired, rebuilt above the roofline, or fully reconstructed. Serving Surrey and Metro Vancouver — free quotes.

Burnaby Masonry Co. provides expert chimney repair & rebuilding in Surrey, BC. Leaning, leaking, or crumbling chimneys repaired, rebuilt above the roofline, or fully reconstructed. Call us for a free quote — we're based in Burnaby and serve Surrey regularly.

Chimney Repair & Rebuilding in Surrey: what to know

Surrey's large housing stock includes thousands of brick chimneys from the 1970s through 1990s that need repair and maintenance. Crown failures and failed mortar joints are the most common issues.

Chimney repair and rebuilding covers everything from a leaking crown to a chimney that's leaning and needs to come down to the roofline and be rebuilt. Chimneys take the worst of the weather, so they fail before the rest of the house. We diagnose the real problem, whether it's a cracked crown, failed flashing, spalling brick, or a deeper structural issue, and fix it properly. In the Lower Mainland's wet climate, a sound chimney is mostly about keeping water out, and that's exactly what we build for.

What's included in our chimney repair & rebuilding service

  • Full chimney inspection from the firebox to the crown
  • Crown repair or rebuild to stop water sitting on top
  • Repointing failed mortar joints in the stack
  • Brick replacement for spalled or cracked masonry
  • Rebuilds above the roofline where the damage stops
  • Full chimney reconstruction when the structure is gone
  • New chimney caps and flashing detail to seal the penetration
  • Water-repellent sealing on the finished masonry

When Surrey homeowners call us for chimney repair & rebuilding

The chimney is leaning or bowing

This is a safety issue. Leaning masonry means the structure or footing is failing and it can fall. Stop using it and call us.

Water stains on the ceiling near the chimney

A leaking chimney shows up as stains inside before you ever see it outside. The crown, cap, or flashing is usually the culprit.

Crumbling brick or mortar on the stack

Pieces of brick or mortar in the gutter or on the roof mean freeze-thaw is breaking the chimney apart.

A cracked or missing crown

The crown is the concrete cap on top. When it cracks, water pours straight into the chimney and accelerates everything.

Surrey properties: what we see

Surrey is Metro Vancouver's largest city by area, and its masonry landscape reflects that diversity. Cloverdale has the oldest housing stock in Surrey — some of the city's pre-war homes and commercial buildings are there, with original brick and heritage character. South Surrey and White Rock have higher-end residential along the waterfront where natural stone and quality masonry finishes are the standard. Fleetwood, Newton, and Whalley have the broad middle market of post-war and 1980s–2000s construction with chimneys, retaining walls, and stone veneer updates. The scale of the city means we're in Surrey frequently.

We work throughout Surrey — including Cloverdale, South Surrey, Fleetwood, Newton, White Rock — and we know how the terrain, housing stock, and climate vary across the city. Every quote reflects what we actually see on site.

Chimney Repair & Rebuilding in Surrey, BC

How we do chimney repair & rebuilding in Surrey

  1. 1

    Inspect top to bottom

    We check the crown, cap, flashing, mortar, and brick, and look for any structural movement, then tell you what's actually wrong.

  2. 2

    Recommend repair or rebuild

    Small problems get repaired. If the damage runs deep, we rebuild from the point where the masonry is still sound.

  3. 3

    Do the masonry

    We repoint, replace brick, or rebuild the stack with matching materials and a properly formed crown that sheds water.

  4. 4

    Seal the penetration

    New flashing and a quality cap keep water out where the chimney meets the roof, which is where most leaks start.

  5. 5

    Waterproof and finish

    We apply a breathable water repellent so the masonry stays dry through our wet winters, then clean up the roof and site.

Why choose Burnaby Masonry for chimney repair & rebuilding in Surrey

We find the real leak

Most chimney leaks are misdiagnosed. We trace it to the source instead of slapping sealant on and hoping.

Built for Lower Mainland weather

Our crowns, caps, and flashing are detailed for heavy, sideways rain, not a dry climate.

Safe with structural calls

If a chimney is unsafe, we'll tell you plainly and won't push a band-aid fix on something that needs a rebuild.

Clean, careful roof work

We protect your roof and property and leave the site clean. No debris left in the gutters.

More masonry services in Surrey

Chimney Repair & Rebuilding across Metro Vancouver

Chimney Repair & Rebuilding in Surrey: FAQs

Do you do chimney repair & rebuilding in Surrey?

Yes. Burnaby Masonry Co. covers Surrey and all of Metro Vancouver for chimney repair & rebuilding. Cloverdale has some of Surrey's oldest brick buildings and is where we do the most heritage repointing work, while the newer South Surrey and Fleetwood developments keep us busy with stone veneer and retaining walls.

Do you work in all parts of Surrey?

Yes — Cloverdale, South Surrey, White Rock, Fleetwood, Newton, Whalley, and Guildford. Surrey's a big city and we cover all of it. Travel time from Burnaby is reasonable for any neighbourhood.

Can you do heritage brick work in Cloverdale?

Yes. Cloverdale has the oldest masonry in Surrey — pre-war homes and commercial buildings with original brick that needs heritage-sensitive repointing with lime mortar and matched salvage brick for any unit replacement.

My chimney is leaning. Is that dangerous?

A leaning chimney means the masonry or footing is failing, and it can come down in a windstorm. Stop using it and call us. We'll tell you whether it can be repaired or needs a rebuild above the roofline.

Why is my chimney leaking when it rains?

Usually it's a failed crown, missing cap, or cracked mortar joints letting water in. We find the source and fix it, then seal the masonry so it stays dry.

Get a free chimney repair & rebuilding quote in Surrey

Burnaby Masonry Co. offers free, no-obligation quotes on brick, stone, and block projects in Burnaby and across Metro Vancouver.

Call (604) 210-5842